BiG enlarges the stereo image in a new manner and opens up new creative ways of sound shaping. Intuitive with just three controls. The On/Bypass switch activates (On) or deactivates (Bypass) the module. This allows you to quickly switch between processed and unprocessed signal.

The signal LEDs (Sig) indicate whether an audio signal is present at the input of the respective channel (with a level higher than -20 dBu). With the Range control, the frequency Range which should be processed can be selected. With the Stage control, the frequency range previously selected with the Range control can be moved backwards or forwards on the stereo stage. The huge BIGNESS control adjusts the intensity of the STEREO IMAGE SHAPING.

The BASS/Off switch can be used to activate (BASS) or deactivate (Off) an additional bass boost following the BIGNESS section. The bass boost is performed by a passive filter implemented in a similar circuit to the one used in the AirBass function of the SPL IRON Mastering Compressor.

With all SPL devices we develop not only according to plan, but also by ear. All important components are installed on the circuit boards using Through-hole technology. This way we can ensure that we can use the best sounding components.

Features

• Signal LEDs
• On/Bypass switch
• Stereo image shaping "Range" knob
• Stereo image shaping "Stage" knob
• Bass switch
• Bigness knob
• Frequency range (-3 dB): 10 Hz - 100 kHz
• Common mode rejection (1 kHz, 0 dBu ): > -82 dBu
• THD + N (0 dBu): 0.03%
• Noise (A-weighted): 92.3 dBu
• Dynamic range: 113 dB
• Impedance: 20 kohms
• Maximum input gain: +21 dBu
• Impedance: 150 ohms
• Maximum output gain: +21 dBu
• Double-slot module, series 500
• Weight: 1.98 lbs (0.9 kg)

For more information, please visit the manufacturer's website.