What’s up bud! Welcome to your brand new Spatial Delivery™! The Spatial Delivery is an oddball, a voltage controlled envelope filter that allows you to step outside the universe of funk while reinforcing your secret love affair with auto-wah.

It has 3 modes - Up Sweep, Down Sweep and Sample and Hold. With Range, Resonance and Filter controls you can get super emphasised filter sweeps in the Up and Down modes. The Range, in combination with pick attack, controls the sensitivity and reaction time of the envelope and thus the width of the frequency sweep. The higher the Range and harder the attack equals a faster reaction time and higher frequency sweep and vice versa. Reign in the controls a bit, add your favourite overdrive/fuzz after the Spatial Delivery and you’ve got a real nice resonant, cut-through-the-mix lead tone. Crank the controls back up and you’re a neo-bedroom rock god. In the Sample and Hold mode the filter is controlled by random voltage and the Range controls the speed. Add a sub octave into the mix (before or after) and you’ve just created a deep fried space droid computer freak-out.

The filter can be cross faded between high pass (counter clockwise), band pass (centre) and low pass (clockwise) for a wide variety of voices. The Resonance control goes from zero to the brink of oscillation and adds more body and ring to the filter voice. EarthQuaker recommend placing the Spatial Delivery first in your signal chain. However, due to its envelope control, experimenting with pairing and signal chain placement can take the potential of the Spatial Delivery even further. Each Spatial Delivery is hand made bit by damn bit in silver studded Akron Ohio.

This device is true bypass and uses relay based “soft touch” switching. Audio will not pass without power.

Features

• Unique envelope filter
• Blendable filters (on 1 knob): Lowpass, bandpass and highpass)
• 3 modes - Up Sweep, Down Sweep and Sample and Hold
• Sample and Hold, great for exciting and somewhat random effects generation
• Flexi-Switch™ allows you to simultaneously use momentary and latching style switching
• Switching is relay based, it requires power to pass signal
• Uses standard 9 volt DC power supply with a 2.1mm negative centre barrel
• Hand made in Akron, Ohio.
• Current Draw: 69mA
• Input impedance: 500K
• Output impedance: <1K

For more information, please visit the manufacturer's website.