Audient RM1 Precision Omnidirectional Reference Microphone for RoomTune

The RM1™ Reference Microphone is the dedicated measurement microphone for Audient's RoomTune™ Monitor Correction on the iD1, iD2, iD2+ and iD4+ interfaces in the iDMK3 range. Studio microphones are voiced to add character, which suits recording but skews a monitor correction measurement. The RM1™ is built to hear the room exactly as it is, and each unit is individually calibrated with its own frequency response profile, so every measurement RoomTune™ takes is accurate.

A MEMS capsule keeps measurements consistent over time, so the RM1™ can be kept on hand and used to re-measure whenever monitors move or the room changes. Setup is automated: after the frequency response profile is loaded, RoomTune™ sets phantom power, mic gain, monitor level and latency compensation itself, with no controls to adjust. The omnidirectional microphone covers 20Hz–20kHz with 70.5dB SNR, 0.1% THD and 130dB SPL maximum, and connects by XLR with 48V phantom power.

Features

• Individually calibrated, with a unique frequency response profile for accurate measurement
• Omnidirectional MEMS capsule for consistent measurements over time
• Required for RoomTune™ Monitor Correction on iD1, iD2, iD2+ and iD4+
• Automated setup of gain, levels, phantom power and latency compensation
• Frequency response of 20Hz–20kHz with 70.5dB signal-to-noise ratio
• 0.1% THD with 130dB SPL maximum level
• XLR connection; requires 48V phantom power from the connected interface
• Lightweight at 56g, easy to store between re-measurements