The Antari W-508 is a smoke machine that is compact with professional features perfect for anyone looking for a cost effective smoke machine. The cutting-edge wireless control system gives Antari W series a simple setting and operation interface.

Additionally, the state-of-the-art heater design upgrades the W Series fog machines to a higher level in terms of good quality fog and energy efficiency.

Intelligent Wireless Control System Each machine comes with a set of wireless receiver and transmitter as standard controller. The working distance of wireless control is 50 meters in open area.

Opto-electronic Fluid Sensor When the fluid recipient runs dry,the fluid sensor stops pumping automatically to protect pump from burning.

The W508 can generate drier fog with smaller particles.This leads to a fairly low fog fluid consumption.Compare to the equivalent power consumption heat exchangers, the same quantity of fog fluid in W series can produce 20% more fog than others.

New Advanced PCB (Printed Circuit Board) Design The new system can control temperature precisely and rule out the influence from outside environments as much as possible to make W series fog machines be able to work stably between – 20 and + 60 degree Celsius.

Antari is a world leading atmospheric effect company that specialises in smoke, haze, fog and bubble machines for global markets. Chances are, if you have owned a smoke machine in the past, regardless of the brand, it was most likely made or designed by Antari.

Features

• 800W Fogger
• Remote control included
• Use up to 5 machines simultaneously
• 100 sec warm up
• Electronic low fluid detector
• Perfect for Night Clubs, Mobile Dj's , Bands, Hire , Stage

Specification

• Power: AC240V, 50Hz-60Hz
• Heater: 800 W
• Output: 3,000 cu.ft / min
• First Heat-up Time: 100 seconds
• Tank Capacity: 0.8 liter
• Fluid Consumption Rate: 60 min / 0.8liter (100% Output)
• Remote Included: W-1 Wireless Remote
• Weight: 3.8 Kg
• Dimensions (mm): L 315 W 128 H 166
• Liquid Used: Antari FLR / FLG Liquid

For more information, please visit the manufacturer's website.