Australia's Largest Range Of Pro Audio Equipment
Need Help?

We’re here to help

Get friendly advice from our industry professionals.

Call 1300 858 394

Studio Monitor Controllers

For volume, speaker selection, routing and headphone control

$1119 inc GST
Save $280 Normally $1,399
Product Code
SPL-MARCONE

SPL Marc One Monitoring & Recording Controller

$1119 inc GST
Increase value Decrease value
Two ways to get the best deals in town:
Hot Offers

Limited specials on a range of top gear

View Hot Offers
Open Box Clearance

Save big on ex-demo and display stock

View Products
Own it now, up to 6 months interest free

Available at checkout. More Info

Safe & Secure Online Shopping
Found a better price? We'll match it!* Price Match Now
icon Ships Free on orders over $100
icon Easy Returns guarantee*
Manufacturer's Warranty: 1 Year Includes 1 Year Free Tech Support

Express Shipping Calculator

For when you can't wait!
    Shipping Info

    Product Information

    The Monitor And Recording Controller with innovative features and a 32-bit AD/DA converter. A monitor controller with which you can also record. And both in impressive sound quality.

    You can listen to your production via two switchable pairs of speakers. A subwoofer is also switched on and off with speaker pair A. In the middle position of the switch, the speakers are switched off, which is convenient because you don’t have to turn the volume control back.

    You can adjust the volume levels at lightning speed with the Monitor knob. In the middle, all input signals are equally loud. To the left, the analog stereo inputs get louder and the USB input signal gets quieter. Turning from the centre to the right does the opposite. So you can quickly and intuitively set the right volume levels.

    Two analog stereo inputs and one digital USB input can be connected to the Marc One. The DAW (Digital Audio Workstation) is preferably connected via USB. Other players like CD player, mixer, synthesizer or an analog tape machine / tape deck can be connected to the analog line inputs.

    The converter chip used is the superior AK4490, which belongs to the new generation of premium 32-bit DACs and is equipped with AKM’s Velvet Sound®. This technology makes the finest details audible thanks to its low-distortion architecture. Sampling frequencies up to 768kHz PCM (16x CD resolution) are supported and DSD (Direct Stream Digital) playback is supported up to DSD4 or DSD256 (11.2 MHz) resolution. Thus the Marc One qualifies for the currently highest resolution audio playback. The USB connection is Class Compliant. This means that all Mac computers and iOS devices like iPads and iPhones can use the full performance bandwidth of the AD/DA converter without driver installation. iOS devices require the camera adapter.

    The Line Out carries the mix between the Line Inputs and USB playback and is controlled by the Monitor knob. The level is unity gain, thus independent of the volume control. So the Marc One can be looped between devices without “losing” an output. For example, if several people should listen in via headphones, headphone amplifiers can be connected to the Line Out. But you can also record the signal analog or send it to a mixer for further processing.

    Three monitoring modes are offered by the Marc One. In the middle is the default setting “Stereo”. To check the mono compatibility set the switch to “Mono”. The special feature is the channel swap function. L/R > R/L reverses the stereo image. L/R becomes R/L. This is important and extremely time-saving when you are searching your sound library for samples in video dubbing that should match a scene with direction of movement. If the direction is not correct, you usually will have to import the sample into the DAW to swap channels before you can hear and judge if the sample with reversed direction fits to the picture. With the L/R > R/L function this is no longer necessary. You can now simply swap the direction of movement while pre-listening samples in the library.

    Poor sound over headphones? Not enough juice? Not here. Marc One delivers a rich headphone sound and it can get really loud. The output stage of the headphone amplifier is designed as a push-pull amplifier in class AB mode. The bipolar transistors share the amplification of the positive and negative half-waves, which produces a higher gain and a higher output voltage than in Class A operation, where only one transistor amplifies both half-waves. The output stage transistors are thermally coupled and thus run particularly coherently, which contributes to a consistent and stable sound image. The power supply has a buffer circuit with low source resistance, ensuring generous current reserves even when driving low-impedance headphones.

    The revolution in the headphone amplifier is the Phonitor Matrix, with adjustable crossfeed, thanks to which you can create mixes with headphones that sound the same on speakers. The Phonitor Matrix in its largest expansion stage has three parameters: Crossfeed, Speaker Angle and Centre Level. In the Marc One, the centre level is preset to -1 dB and the speaker angle to 30°. These are the most commonly used values. The crossfeed function determines the so-called interaural level difference. The intensity of the crossfeed is fully variable. At the beginning of the control path the crossfeed circuit is not in the audio path. Dialling the control in switches on the crossfeed circuit via relay (hysteresis circuit). The audio signal therefore does not pass through the crossfeed stage if this is not desired.

    If the active speakers or the power amplifier are very sensitive the playback may already be fairly loud when the Volume control is in the first third of its control range. By activating the -10 dB dip switch the output level is lowered to accommodate for a wider usable range of the Volume control. With the Rec 1+2 dip switch both line inputs are mixed together and can be recorded via USB.

    Good sound always starts with the power supply. This is where you lay the foundation for the performance of the entire device. Although SPL “only” supply a 12 V plug-in power supply unit, the secondary power supply inside generates a voltage level of +/-17 Volts for the analog audio sections with which professional levels of up to +22.5 dB can be achieved! An elaborate low-drop operating voltage regulation provides more “juice” and regulates cleanly even when maximum operating voltages are reached. The Marc One delivers full power when used with the included 1.5 A power supply. Only use the 12 V plug-in power supply unit within the scope of delivery. The ON-switch puts the Marc One into operation.

    Features
    • Monitor and recording controller
    • Switchable speaker pairs and subwoofer
    • AKM AK4490 premium 32-bit DAC
    • Adjust the volume levels at lightning speed with the Monitor knob
    • Two analog stereo inputs and one class compliant USB input
    • Selected input signal is output unchanged at the Line Out
    • Three monitoring modes: mono, stereo, and reverse stereo
    • Headphone power amp for rich headphone sound
    • Phonitor Matrix makes headphones sound like monitors for accurate mixes
    • Low-drop operating voltage regulation provides more “juice”

    For more information, please visit the manufacturer's website.

    1119.00
    Our Price
    $1119 inc GST
    $1119 inc GST
    Increase value Decrease value
    Staff Pictures
    We’re here to help... Our friendly staff are seasoned professionals in the industry, with in depth knowledge on the latest products and technologies. They are available to offer you personalized product advice.
    Call 1300 858 394 Live Chat
    Products to compare:
    Comparing Products